When do you use 4×4 High vs. Low? (2024)

When do you use 4×4 High vs. Low? (1)

The popularity of 4×4, also known as All-Wheel Drive, vehicles becomes apparent when you step onto any of the dealer lots associated with Beach Boulevard of Cars. SUVs, trucks, and crossovers often offer that advance as a standard or optional feature. And even sedans and compacts sometimes include it to increase sportiness.


A 4×4 is useful in Southern California when you head for the mountains on a ski trip or go off-roading in the desert. It increases your vehicle’s grip on the road during low-traction scenarios, such as when you’re making quick lane changes on rain-slicked freeways. They also give you firmer footing over gravel or mud, or when you’re trying to go down a steep incline over a dirt road.

You typically get three settings with an all-wheel drive.

  • Sticking with Auto: This default setting offers convenience by automatically switching from two-wheel drive to four-wheel drive when one of the wheels starts to slip, such as on a hill or slippery areas. This is most useful when generally smooth and dry surfaces have variable sections, such as when a dry highway includes patches of water or snow, or a paved trail has gravel sections.
  • When to use High: Choose high-range 4×4 when you want to drive at normal speeds over roads that are wet or snowy, such as when enduring your 405 commutes in a summer storm or beating the ski traffic to Big Bear during winter. You can also engage this setting when you’re stuck in sand or snow so you can get out more easily. Limit your speeds to 55 MPH or less or you may damage the transfer case.
  • When to use Low: To maximize both power and traction, you can rely on low-range 4×4 for crawling over rocks, fording creeks, plowing through deep sand, or negotiating steep off-road trails. At this setting, the wheels turn more slowly than on High, so use Low only at speeds of 40 MPH or less. You would rarely use this setting except when you go on rough terrain.

One caveat is that you do not engage four-wheel drive on smooth and dry roads or you could damage your vehicle’s drivetrain. Because four-wheel drive engages all wheels, stopping becomes less efficient in such situations, particularly at high speeds. Instead, depend on a two-wheel drive for everyday driving, which will also pump up your gas mileage.

If you’re interested in finding out more about the advantages of 4×4 High or Low, pay a visit to any of our dealers at Beach Blvd of Cars. Our sales consultant will be thrilled to answer your questions and take you on a test drive.

When do you use 4×4 High vs. Low? (2024)

FAQs

When do you use 4×4 High vs. Low? ›

If you are moving at speeds greater than 25mph and need superior traction, then 4WD high will be the way to go — such as cruising to the ski slopes on the interstate when the first snowflakes begin to fall.

When to use 4X4 high vs low? ›

When conditions are slippery – say deeper snow or mud – but you're driving at typical road speeds, use 4Hi. Need maximum traction and driving at low speeds? Go to 4Lo. When you're trying to move an unusually heavy load, climb a steep incline or get through tricky conditions like deep mud, 4Lo is the best choice.

When should 4WD high range be used? ›

High- and low-range explained (basically)

In 4H (four-wheel drive, high range) all four wheels are driving your vehicle. You use 4H for surfaces on which you may need greater traction than you would for bitumen; think firm sand, dirt roads, gravel tracks and the like.

When not to use 4X4 high? ›

You'll likely want to reserve using 4 High in situations where you're going more than 15 MPH but slower than 55 MPH. This mode is meant to apply more traction on snowy or icy roads. You can also use it for off-roading, but it's not meant to be used in normal, dry driving conditions on a road.

When to use 4H vs 4L? ›

4H is the way to go for snowy, icy, muddy, or rocky surfaces, providing better traction and stability. It is also great for moderate off-road conditions with some obstacles or inclines. On the other hand, 4L is intended for extreme off-road conditions such as steep inclines, coarse terrain, and deep mud.

Can I switch to 4H while driving? ›

Note: Do not perform this operation if the rear wheels are slipping or when applying the accelerator pedal. Note: You may hear some noise as the system shifts or engages; this is normal. You can move the control from 2H to 4A or 4H at a stop or while driving.

When to use 2H 4H 4L? ›

DO use 2H for regular highway driving. DO shift into 4H for highway driving on slick or slippery roads up to 88 kph. DON'T exceed speeds of 40 kph while in 4L mode. DON'T attempt to shift directly from 2H to 4L (or vice versa).

Can you drive in 4WD high all the time? ›

Car and Driver notes that 4WD is not meant to be used all the time. It's only for certain road types, including rugged terrain and off-roading, as well as slippery conditions, like snow or mud. Otherwise, 4WD vehicles should be driven in two-wheel drive, according to Car and Driver.

Is it okay to drive in 4H on the highway? ›

Traveling in 4WD on flat, smooth, dry roads is not recommended, as it will damage your drivetrain. Also, remember that four-wheel drive provides more torque and engages all the tires for movement, thus it doesn't help you stop. Always travel at speeds that allow you to stop safely.

Can you use 4H on pavement? ›

Note: Do not use 4H or 4L mode on dry, hard surfaced roads. Doing so will produce excessive noise, increase tire wear and may damage drive components.

Can you drive 70 mph in 4 wheel drive? ›

Low range is meant predominantly for off-road situations, and should not be used at speeds above 45 mph.

How fast should you go in 4x4 high? ›

4H (High) When your 4WD system is set to 4H, you can drive fast, but not too fast. Most automakers suggest keeping the speed at 55 MPH or less. With 4H, you gain more traction on icy, snowy, muddy, and rocky roads.

Is 4H or 4l better for mud? ›

4H provides better traction and stability on uneven or slippery surfaces. It can also be useful in situations where the vehicle may become stuck, such as in mud or snow.

Can you switch from 4H to 2H while driving? ›

Can I Switch from 4H to 2H While Driving? Modern vehicles allow drivers to easily switch from 4WD to 2WD and vice versa. However, older models require vehicles to stop before making the switch.

How to switch from 2H to 4H? ›

The lever is labeled with “2H,” “4H,” “N,” and “4L.” To put your Jeep in 4-wheel drive high, place it in park, or drive it under 40 mph (64 kph). Then, pull the transfer case shifter lever from “2H” down to “4H.” To put your car in 4-wheel drive low, drive around 2 to 3 mph (3-5 kph).

Should I use 4WD in snow? ›

If you live on a back road that isn't plowed, a vehicle with 4WD may make more sense for your needs. If you're in the city where roads are typically plowed but still slick, an AWD car may be your best bet.

When should 4WD low be used? ›

When to use Low: To maximize both power and traction, you can rely on low-range 4×4 for crawling over rocks, fording creeks, plowing through deep sand, or negotiating steep off-road trails. At this setting, the wheels turn more slowly than on High, so use Low only at speeds of 40 MPH or less.

Can I drive slow in 4WD high? ›

Theoretically in 4WD Hi you can drive at any speed you want (provided you are not turning), however most of the time conditions will dictate that you not drive very fast, otherwise you wouldn't be using 4WD.

References

Top Articles
Latest Posts
Article information

Author: Arielle Torp

Last Updated:

Views: 5532

Rating: 4 / 5 (41 voted)

Reviews: 80% of readers found this page helpful

Author information

Name: Arielle Torp

Birthday: 1997-09-20

Address: 87313 Erdman Vista, North Dustinborough, WA 37563

Phone: +97216742823598

Job: Central Technology Officer

Hobby: Taekwondo, Macrame, Foreign language learning, Kite flying, Cooking, Skiing, Computer programming

Introduction: My name is Arielle Torp, I am a comfortable, kind, zealous, lovely, jolly, colorful, adventurous person who loves writing and wants to share my knowledge and understanding with you.